Tilt and Slide Patio Door Repairs
A well-functioning tilt and slide patio door brings fresh air, light and easy movement between indoors and out. Modern aluminium doors offer strength and durability as well as thermal integrity, and a range of glass options for an array of styles.
Dirty tracks and rollers are the most common cause of sliding door problems. Cleaning and regular lubrication of these moving parts can ensure that your door functions correctly.
Track and Roller Replacement
The track and the rollers are vital for sliding doors to function. They are situated at the bottom of a door panel made of aluminum and rest on a raised track that allows them to move when they open and close. Over time, dirt can cause the tracks to become clogged and the rollers be damaged. Keep your patio door lubricated and clean to prevent these problems.
Unless your track is severely bent, it's usually possible to fix the track and rollers, without taking the door off. You can ask a friend to help you lift the panel off the bottom track by bending it towards you (Photo 3). This may require some effort as the panels can be heavy. After the panel has been removed, lay the panel flat on sawhorses to inspect the rollers. If they're damaged, replace them with a brand new roller assembly. You can alter the height of the rollers by turning the adjustment screws which are usually located in slots along the edge of the panel.
If the rollers are in good shape they may just require cleaning and lubricated. Remove the rollers with a screwdriver and wash them with denatured ethanol. This will remove any grime or dirt that may be causing the resistance. Then, carefully position each roller back into its slot and fully retract it by using the adjustment screw. Then, last but not least spray the rollers using silicone spray. This type of lubricant won't collect dirt like petroleum-based products and will let your door move effortlessly.
After cleaning the rollers and reinstalling them you can reinstall the door and test it to make sure the track is in alignment with the rollers and that the doors are sliding smoothly. If you encounter any other problems, contact an expert in your area for assistance. Keep your doors clean and lubricated to extend their life and minimize the need for repairs. We recommend a lubricant made of silicone because it doesn't draw dirt the way that WD-40 does. It is recommended to lubricate your tracks and rollers at least once a month.
Replace insect screens
Patio doors that slide open are a great way to maximize floor space, provide airflow and allow in beautiful panoramic views. However, they can become troublesome if the mechanism stops functioning or isn't working correctly. Luckily, most problems with sliding screen doors are easily resolved. Dirty rollers due to debris in the track or a wrinkly screen are common culprits, but you can usually solve them by following these simple steps.
If your screen is sagging or is wrinkling, first lay the frame on an unfinished work surface. Then place a 1x4 board under each end to put some slight bows in the middle. This will help to draw the screen closer and straighten it.
Make sure you purchase a replacement screen that is at least a couple of inches bigger than the frame's opening in both directions. You'll be able to reduce any excess. Make sure you press one end of the rubber spline into the channel with the spline rolling tool. Once you've completed this, it's time to add the rest of your spline.
Adjusting the Panel
The tilt and slide mechanism lets you widen the patio doors to allow for more ventilation while keeping your pets, children and other household members out. The doors require more force to open than you would expect. Over time, this can lead to more friction and crooked tracks, or misalignments, which could cause the door to not function as it should. Identifying these problems early and making minor adjustments will often solve them, reducing the need for costly replacement hardware.
The first step in adjusting the tilt and slide patio door is to remove the panel and set it on a flat surface. Once the panels are removed, use a screwdriver to remove the plastic hole caps from each of the adjustment rollers. After the plastic holes are removed, make use of a long shafted screwdriver to force the adjuster out of its channel. After removing the roller, clean it with denatured or rubbing alcohol. This will clear away any grime that may be creating resistance and allow the roller to retract easily into its channel after the process is completed.
When reinstalling the moving panel to be reinstalled, align it with its frame and employ the drill to drive the screws along the flange. The flange must be securely secured to the edge of the door and ensure that the flaps are oriented correctly. Once the movable panel is in position, apply a blob of silicone-based lubricant onto the top track arm connector block as well as the lead Bogie wheel and the slave Bogie wheel, and then replace the plastic hole caps.
Repeat the process for the other two panels that can be moved to restore their slide functionality. Install the plastic flanges. Then, Resource to the equivalent fixed panel using a plastic adhesive. Once the glue is dry, reattach the handle and verify smooth operation. If the problem persists then adjust the lead Bogie by getting rid of it, cleaning it and reinstalling with a silicone-based grease.
Charley Bar Installation
A patio door is a great way to let your pets into and out of the house, but it can also be a convenient access point for burglars. You can improve the security of your patio door by putting in a pin lock or the charcoal bar. These locks provide a blend of convenience and security that is unmatched by any other product available.
The charley bar is an excellent option for sliding glass door, and it can be installed easily at your home. The charley bar can be installed in the middle of your door and prevents the patio door from being jibbered open with tools or other objects, such as the hockey stick or broom handle. The charley bars are made from polycarbonate tubes that have been molded in injection and extruded RPVC tubing that telescoping, making them strong and durable.
To install the charley bar, first verify that it is the correct length for your door by measuring horizontally from the edge of the sliding door track to the sliding glass patio door. Mark the points using pencils where the charley bars will be installed. Utilize a drill bit that is 8 inches to drill holes into the wall jamb and frame of the patio door be cautious not to cut through the glass of the patio door. Then tighten the screws that came with the charley bars.
The Charley bars are an excellent option for sliding glass patio doors or windows made of sash. This simple security gadget will keep your patio sliding doors safe from burglars and tampering for many years to be. It is constructed of injection-molded polycarbonate, and has been tested to withstand over 400 pounds of pressure by Intertek. The charley bar is lockable using the key that comes with it. It's easy to put it up, and it hangs away when not being used. You can buy the charley bar at most hardware stores. However, if you want to buy one that is sure to work, you should consider purchasing a charley bar from an online retailer.